Chris Owens

Heroku Upload – Permission Denied

I ran into a bit of trouble uploading an app to heroku for the first time, I was unable to authenticate.

root@chris-VirtualBox:~/site# git push heroku master
Permission denied (publickey).
fatal: The remote end hung up unexpectedly

This turned out to be an issue with my public key, in order to fix it simply create a new one:

root@chris-VirtualBox:~/site# ssh-keygen -t rsa
Generating public/private rsa key pair.
Enter file in which to save the key (/root/.ssh/id_rsa): 
Enter passphrase (empty for no passphrase): 
Enter same passphrase again: 
...

Re-upload it:

root@chris-VirtualBox:~/site# heroku keys:add /root/.ssh/id_rsa.pub
Uploading ssh public key /root/.ssh/id_rsa.pub

And finally re-push everything:

root@chris-VirtualBox:~/site# git push heroku master
Enter passphrase for key '/root/.ssh/id_rsa': 
Counting objects: 579, done.
Compressing objects: 100% (513/513), done.
Writing objects: 100% (579/579), 6.09 MiB | 83 KiB/s, done.
Total 579 (delta 101), reused 0 (delta 0)

-----> Heroku receiving push
-----> Ruby/Rails app detected

This Heroku page actually provides quite a bit of info if you’re still having problems: http://devcenter.heroku.com/articles/rails3

PostgreSQL Installation Error – Ruby

I ran into a bit of problem moving an app to a test Heroku host – I needed to install PostgreSQL. I added the following to my Gemfile:

#Gemfile
#gem 'sqlite3'
gem 'pg'

I then tried to run bundle install:

root@chris-VirtualBox:~/site# bundle install

However I received the following error:

root@chris-VirtualBox:~/site# bundle install


Fetching source index for http://rubygems.org/
Using rake (0.9.2) 
Using multi_json (1.0.3) 
Using activesupport (3.1.1) 
Using builder (3.0.0) 
Using i18n (0.6.0) 
Using activemodel (3.1.1) 
Using erubis (2.7.0) 
Using rack (1.3.4) 
Using rack-cache (1.1) 
Using rack-mount (0.8.3) 
Using rack-test (0.6.1) 
Using hike (1.2.1) 
Using tilt (1.3.3) 
Using sprockets (2.0.2) 
Using actionpack (3.1.1) 
Using mime-types (1.16) 
Using polyglot (0.3.2) 
Using treetop (1.4.10) 
Using mail (2.3.0) 
Using actionmailer (3.1.1) 
Using arel (2.2.1) 
Using tzinfo (0.3.30) 
Using activerecord (3.1.1) 
Using activeresource (3.1.1) 
Using bundler (1.0.21) 
Using rack-ssl (1.3.2) 
Using json (1.6.1) 
Using rdoc (3.10) 
Using thor (0.14.6) 
Using railties (3.1.1) 
Using rails (3.1.1) 
Using acts-as-taggable-on (2.1.1) 
Using awesome_nested_set (2.0.2) 
Using bcrypt-ruby (3.0.1) 
Using carrierwave (0.5.7) 
Using cocaine (0.2.0) 
Using coffee-script-source (1.1.2) 
Using execjs (1.2.9) 
Using coffee-script (2.2.0) 
Using coffee-rails (3.1.1) 
Using orm_adapter (0.0.5) 
Using warden (1.0.6) 
Using devise (1.4.8) 
Using escape (0.0.4) 
Using geocoder (1.0.5) from git://github.com/alexreisner/geocoder.git (at no_grouping) 
Using jquery-rails (1.0.16) 
Using libv8 (3.3.10.2) 
Using nokogiri (1.5.0) 
Using paperclip (2.4.5) 
Installing pg (0.12.2) with native extensions 
Gem::Installer::ExtensionBuildError: ERROR: Failed to build gem native extension.

        /usr/bin/ruby1.8 extconf.rb 
checking for pg_config... no
No pg_config... trying anyway. If building fails, please try again with
 --with-pg-config=/path/to/pg_config
checking for libpq-fe.h... no
Can't find the 'libpq-fe.h header
*** extconf.rb failed ***
Could not create Makefile due to some reason, probably lack of
necessary libraries and/or headers.  Check the mkmf.log file for more
details.  You may need configuration options.

Provided configuration options:
	--with-opt-dir
	--without-opt-dir
	--with-opt-include
	--without-opt-include=${opt-dir}/include
	--with-opt-lib
	--without-opt-lib=${opt-dir}/lib
	--with-make-prog
	--without-make-prog
	--srcdir=.
	--curdir
	--ruby=/usr/bin/ruby1.8
	--with-pg
	--without-pg
	--with-pg-dir
	--without-pg-dir
	--with-pg-include
	--without-pg-include=${pg-dir}/include
	--with-pg-lib
	--without-pg-lib=${pg-dir}/lib
	--with-pg-config
	--without-pg-config
	--with-pg_config
	--without-pg_config


Gem files will remain installed in /usr/lib/ruby/gems/1.8/gems/pg-0.12.2 for inspection.
Results logged to /usr/lib/ruby/gems/1.8/gems/pg-0.12.2/ext/gem_make.out
An error occured while installing pg (0.12.2), and Bundler cannot continue.
Make sure that `gem install pg -v '0.12.2'` succeeds before bundling.

It turned out that because I was on Ubuntu I needed to install the libpq-dev package:

root@chris-VirtualBox:~/site# apt-get install libpq-dev


Reading package lists... Done
Building dependency tree       
Reading state information... Done
The following packages were automatically installed and are no longer required:
  linux-headers-2.6.38-8 linux-headers-2.6.38-8-generic
Use 'apt-get autoremove' to remove them.
The following extra packages will be installed:
  comerr-dev krb5-multidev libgssapi-krb5-2 libgssrpc4 libk5crypto3
  libkadm5clnt-mit7 libkadm5srv-mit7 libkdb5-4 libkrb5-3 libkrb5-dev
  libkrb5support0 libpq5 libssl-dev
Suggested packages:
  krb5-doc krb5-user postgresql-doc-8.4
The following NEW packages will be installed:
  comerr-dev krb5-multidev libgssrpc4 libkadm5clnt-mit7 libkadm5srv-mit7
  libkdb5-4 libkrb5-dev libpq-dev libpq5 libssl-dev
The following packages will be upgraded:
  libgssapi-krb5-2 libk5crypto3 libkrb5-3 libkrb5support0
4 upgraded, 10 newly installed, 0 to remove and 106 not upgraded.
Need to get 3,142 kB of archives.
After this operation, 8,520 kB of additional disk space will be used.
Do you want to continue [Y/n]? y
Get:1 http://au.archive.ubuntu.com/ubuntu/ natty-updates/main libk5crypto3 i386 1.8.3+dfsg-5ubuntu2.2 [76.7 kB]
Get:2 http://au.archive.ubuntu.com/ubuntu/ natty-updates/main libgssapi-krb5-2 i386 1.8.3+dfsg-5ubuntu2.2 [100 kB]
Get:3 http://au.archive.ubuntu.com/ubuntu/ natty-updates/main libkrb5-3 i386 1.8.3+dfsg-5ubuntu2.2 [327 kB]
Get:4 http://au.archive.ubuntu.com/ubuntu/ natty-updates/main libkrb5support0 i386 1.8.3+dfsg-5ubuntu2.2 [22.2 kB]
Get:5 http://au.archive.ubuntu.com/ubuntu/ natty-updates/main libgssrpc4 i386 1.8.3+dfsg-5ubuntu2.2 [54.6 kB]
Get:6 http://au.archive.ubuntu.com/ubuntu/ natty-updates/main libkadm5clnt-mit7 i386 1.8.3+dfsg-5ubuntu2.2 [38.7 kB]
Get:7 http://au.archive.ubuntu.com/ubuntu/ natty-updates/main libkdb5-4 i386 1.8.3+dfsg-5ubuntu2.2 [38.1 kB]
Get:8 http://au.archive.ubuntu.com/ubuntu/ natty-updates/main libkadm5srv-mit7 i386 1.8.3+dfsg-5ubuntu2.2 [51.6 kB]
Get:9 http://au.archive.ubuntu.com/ubuntu/ natty/main comerr-dev i386 2.1-1.41.14-1ubuntu3 [41.5 kB]
Get:10 http://au.archive.ubuntu.com/ubuntu/ natty-updates/main krb5-multidev i386 1.8.3+dfsg-5ubuntu2.2 [82.5 kB]
Get:11 http://au.archive.ubuntu.com/ubuntu/ natty-updates/main libpq5 i386 8.4.10-0ubuntu0.11.04.1 [81.6 kB]
Get:12 http://au.archive.ubuntu.com/ubuntu/ natty/main libssl-dev i386 0.9.8o-5ubuntu1 [2,019 kB]
Get:13 http://au.archive.ubuntu.com/ubuntu/ natty-updates/main libkrb5-dev i386 1.8.3+dfsg-5ubuntu2.2 [15.0 kB]
Get:14 http://au.archive.ubuntu.com/ubuntu/ natty-updates/main libpq-dev i386 8.4.10-0ubuntu0.11.04.1 [193 kB]
Fetched 3,142 kB in 6s (506 kB/s)                                              
(Reading database ... 167506 files and directories currently installed.)
Preparing to replace libk5crypto3 1.8.3+dfsg-5ubuntu2.1 (using .../libk5crypto3_1.8.3+dfsg-5ubuntu2.2_i386.deb) ...
Unpacking replacement libk5crypto3 ...
Preparing to replace libgssapi-krb5-2 1.8.3+dfsg-5ubuntu2.1 (using .../libgssapi-krb5-2_1.8.3+dfsg-5ubuntu2.2_i386.deb) ...
Unpacking replacement libgssapi-krb5-2 ...
Preparing to replace libkrb5-3 1.8.3+dfsg-5ubuntu2.1 (using .../libkrb5-3_1.8.3+dfsg-5ubuntu2.2_i386.deb) ...
Unpacking replacement libkrb5-3 ...
Preparing to replace libkrb5support0 1.8.3+dfsg-5ubuntu2.1 (using .../libkrb5support0_1.8.3+dfsg-5ubuntu2.2_i386.deb) ...
Unpacking replacement libkrb5support0 ...
Selecting previously deselected package libgssrpc4.
Unpacking libgssrpc4 (from .../libgssrpc4_1.8.3+dfsg-5ubuntu2.2_i386.deb) ...
Selecting previously deselected package libkadm5clnt-mit7.
Unpacking libkadm5clnt-mit7 (from .../libkadm5clnt-mit7_1.8.3+dfsg-5ubuntu2.2_i386.deb) ...
Selecting previously deselected package libkdb5-4.
Unpacking libkdb5-4 (from .../libkdb5-4_1.8.3+dfsg-5ubuntu2.2_i386.deb) ...
Selecting previously deselected package libkadm5srv-mit7.
Unpacking libkadm5srv-mit7 (from .../libkadm5srv-mit7_1.8.3+dfsg-5ubuntu2.2_i386.deb) ...
Selecting previously deselected package comerr-dev.
Unpacking comerr-dev (from .../comerr-dev_2.1-1.41.14-1ubuntu3_i386.deb) ...
Selecting previously deselected package krb5-multidev.
Unpacking krb5-multidev (from .../krb5-multidev_1.8.3+dfsg-5ubuntu2.2_i386.deb) ...
Selecting previously deselected package libpq5.
Unpacking libpq5 (from .../libpq5_8.4.10-0ubuntu0.11.04.1_i386.deb) ...
Selecting previously deselected package libssl-dev.
Unpacking libssl-dev (from .../libssl-dev_0.9.8o-5ubuntu1_i386.deb) ...
Selecting previously deselected package libkrb5-dev.
Unpacking libkrb5-dev (from .../libkrb5-dev_1.8.3+dfsg-5ubuntu2.2_i386.deb) ...
Selecting previously deselected package libpq-dev.
Unpacking libpq-dev (from .../libpq-dev_8.4.10-0ubuntu0.11.04.1_i386.deb) ...
Processing triggers for man-db ...
Processing triggers for doc-base ...
Processing 1 added doc-base file(s)...
Registering documents with scrollkeeper...
Processing triggers for install-info ...
Setting up libkrb5support0 (1.8.3+dfsg-5ubuntu2.2) ...
Setting up libk5crypto3 (1.8.3+dfsg-5ubuntu2.2) ...
Setting up libkrb5-3 (1.8.3+dfsg-5ubuntu2.2) ...
Setting up libgssapi-krb5-2 (1.8.3+dfsg-5ubuntu2.2) ...
Setting up libgssrpc4 (1.8.3+dfsg-5ubuntu2.2) ...
Setting up libkadm5clnt-mit7 (1.8.3+dfsg-5ubuntu2.2) ...
Setting up libkdb5-4 (1.8.3+dfsg-5ubuntu2.2) ...
Setting up libkadm5srv-mit7 (1.8.3+dfsg-5ubuntu2.2) ...
Setting up comerr-dev (2.1-1.41.14-1ubuntu3) ...
Setting up krb5-multidev (1.8.3+dfsg-5ubuntu2.2) ...
Setting up libpq5 (8.4.10-0ubuntu0.11.04.1) ...
Setting up libssl-dev (0.9.8o-5ubuntu1) ...
Setting up libkrb5-dev (1.8.3+dfsg-5ubuntu2.2) ...
Setting up libpq-dev (8.4.10-0ubuntu0.11.04.1) ...
Processing triggers for libc-bin ...
ldconfig deferred processing now taking place
root@chris-VirtualBox:~/site#

And then just run bundle install again:

root@chris-VirtualBox:~/site# bundle install

There’s some documentation on the gems wiki page: https://bitbucket.org/ged/ruby-pg/wiki/Home

Unable to edit files uploaded to document library where url length is more than 260 characters – SharePoint

Just a quick problem I came across in SharePoint today when trying to edit a file:

Unable to edit files uploaded to document library where url length is more than 260 characters

The folder structure being used was fairly complex, unfortunately this meant that a filename only had to be a few characters long to exceed this rule. Unfortunately there does not appear to be an easy way to fix this issue other than reorganizing the folder structure.

One workaround is to simply press the “Open with Explorer” button and edit the file that way. Thankfully the url limitation does not effect files reached through this method.

This link has a bit more info for anyone who may be interested.

Create Button which does not Submit – Ruby on Rails

Just another quick post – how to create a button which does not submit a form when it’s clicked:

 'button', :onclick => 'alert('Button not Submitted - Hopefully!!!!'), :class => "my_class" %>

Let me know if you have any problems.

Start Rails Console – Ruby on Rails

Just a quick post on the command to start the rails console:

chris@chris-VirtualBox:~/site$ rails console

Loading development environment (Rails 3.1.1)
irb(main):001:0>

Here’s the documentation, it provides a pretty good summary of all the commands you’re likely to need.

Devise Overriding Controller Route – Ruby on Rails

I ran into a bit of a problem today after implementing a search form that appeared on every page. When the login page was loaded I received the following error:

No route matches {:controller=>”devise/products”, :method=>:get, :action=>”search”}

The weird thing about this is that the route my search form uses does not mention devise in any way:

 'products', :action => 'search', :method => :get do %>

As you have probably already guessed, I’m using devise to handle my authentication. Unfortunately this seems to be overriding some of my routes whenever it co-exists with another form. Luckily there exists a very simple, although hard to find solution – simply add a forward slash before the controller definition:

 '/products', :action => 'search', :method => :get do %>

Here’s a quick link to the StackOverflow post which gave the answer, hopefully a few more links to it will make it a little easier to find for anyone else out there doing a search!

Re-Index Sunspot/Solr – Ruby on Rails

Just a very quick post on how to re-index Sunspot/Solr – simply open the console and enter the following command:

chris@chris-VirtualBox:~/site$ rake sunspot:solr:reindex

WARNING: 'task :t, arg, :needs => [deps]' is deprecated.  Please use 'task :t, [args] => [deps]' instead.
    at /usr/lib/ruby/gems/1.8/gems/sunspot_rails-1.2.1/lib/sunspot/rails/tasks.rb:41
chris@chris-VirtualBox:~/site$

That’s all there is to it, nice and easy!

Will_Paginate with Sunspot – Ruby on Rails

Hey all,

I’ve just gone through setting up will_paginate with sunspot 1.3, just thought I’d share in case anyone else has any troubles/improvements.

In my case I’m setting it up on a products model.

  #products.rb

  #Sunspot/Search
  searchable do
    text :title, :boost => 5
    text :description
  end

#products_controller.rb
  #Products search
  def search

    #Create vars
    search = Product.search do
      fulltext params[:search]
      paginate :page => params[:page] || 1, :per_page => 2
    end    

    #Retrieve results
    @products = search.results

    #Create responses
    respond_to do |format|
      format.html { render 'index' }
    end
  end

#Search partial - _search.html.erb
 'products', :action => 'search', :method => :get do %>
    '25', :class => 'search' %>

#Product display page - index.html.erb

    "products/product_line", :locals => {:product => product} %>

      
 false, :params => { :search_text => params[:search_text] } %>

Well that’s about it, if anyone needs any further info or has any tips, leave a comment and I’ll get back to you asap.

Uninstalling a Gem – Ruby on Rails

Due to a few recent issues with SunSpot (see my previous posts), I’ve decided to uninstall it until I have enough time to work on it properly. Once again, Ruby makes this pretty simple:


chris@chris-VirtualBox:~/site$ sudo gem uninstall sunspot
[sudo] password for chris: 

You have requested to uninstall the gem: sunspot-1.2.1 sunspot_rails-1.2.1 depends on [sunspot (= 1.2.1)]
If you remove this gems, one or more dependencies will not be met.
Continue with Uninstall? [Yn]  y


Remove executables: sunspot-solr, sunspot-installer in addition to the gem? [Yn]  y


Removing sunspot-solr
Removing sunspot-installer


Successfully uninstalled sunspot-1.2.1

ActiveRecord::HasManyThroughAssociation NotFoundError – Ruby on Rails

I ran into a bit of a problem with a has_many relationship in rails today:

ActiveRecord::HasManyThroughAssociationNotFoundError in FeedbacksController#index
…
Could not find the association :sub_orders in model User

This turned out to be a fairly simple fix, I had forgotten to add a has_many relationship before adding the has_many :through => x relationship. There is a fairly detailed explanation on StackOverflow for anyone who is curious.